ZPI-4- VIKING Multi-Zone Overhead Paging System Interface, Touch Tone Controlled

Description

The ZPI-4 is a four-zone touch tone controlled paging system capable of switching a line level signal (600 Ohms) to amplifiers, an amplified signal to 70V speakers, or an amplified signal (200 Watts maximum) to 8 Ohm speakers.
The ZPI-4 features balanced audio circuitry throughout for low noise and compatibility with balanced paging system inputs and outputs. There are separate level controls for paging and background music, and background music can be disabled on a per-zone basis. Also provided is a night bell with adjustable volume activated by a dry contact closure or a ringing analog PABX/KSU station.
The ZPI-4 is compatible with ringing analog PABX/KSU station ports (disconnects on silence, CPC, busy, touch tone (#) or timeout) as well as unused trunk inputs, and will interface directly with standard paging ports.
Features
Touch Tone control of four zones, expandable to 8 zones
Switches line level signal to amplifiers or amplified signal to speakers (amplifier(s) not included)
Balanced audio circuitry for low noise
Night bell warble with adjustable level from contact closure or ringing analog station
Input provided for background music
Separate paging and background music level adjustments
Background music automatically mutes in paged zone(s) in all but single amplifier mode
All-call and five group call patterns, selected by Touch Tones
Selectable page alert tone with adjustable level
Interfaces with ringing analog station ports, paging ports and unused phone system trunk ports
Disconnects on silence, CPC, busy, touch tone “#” or time-out
Screw terminals for all input/output connections
Specifications
Power: 120V AC/13.8V AC, 1.25A adapter provided
Dimensions: 211mm x 160mm x 46mm (8.30″ x 6.30″ x 1.80″)
Shipping Weight: 1.5 kg (3.2 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
Relay Contacts: 5 Amps@30V DC/250V AC each (350W@70V, 200W@8Ohm)
REN: 0.5 A
Artificial Talk Battery Voltage: 24V DC
Connections: (32) cage clamp screw terminals